MixChecker

MixChecker is an advanced assistant for any sound engineer who cares about how their listeners hear sound on conventional devices. It is a plug-in module for VST, AU and AAX applications on PC and Mac.

The MixChecker plug-in puts itself on the master track of your DAW application. Without tedious and repetitive exports, it tells you how your mix will sound on the devices your listeners are using. One click turns your studio monitors into classic reference monitors or low-end devices like a smart phone, regular laptop or tablet so you can mix as if you were doing it right on them.

The plug-in controls are divided into three sections.

Compensation

If you don't have "flat" studio monitors and are using smaller speakers or headphones for your listening, use one of the three buttons to fine-tune the characteristics of the device being modeled.

Simulation

In the Simulation section, you'll find classic reference monitors, but you'll also find devices on which regular listeners play your content. With one touch you switch to a car radio, a regular hifi tower, a smart phone, a tablet or a laptop. Simulations of these devices were created in a laboratory environment by measuring the impulse responses of each device.

Bypass

The Bypass button turns off all MixChecker processing - both simulation and listening compensation, and the plug-in passes the completely clean sound of your mix.